6.21 Run-time Failures
Moderators: misra-c, david ward
- Posts: 11
- Joined: Mon Feb 20, 2006 12:28 pm
I use a tool, which tested code to MISRA-C:2004 compliance.
Here is a code example, on which our analyse tool says, there is a breach of rule 21.1.
Code: Select all
STATE = 0x01;
MASK = 0x10;
STATE = ~MASK;
/* That line it is, which show up the breach of the rule*/
The Tool says, this breaches rule 21.1. But i think it's ok, or what do the MISRA comitee says?
thanks a lot
- Posts: 548
- Joined: Thu Jan 05, 2006 1:11 pm
MISRA-C meeting 22-8-2006
Your example is fully compliant.
Posted by and on behalf of
the MISRA C Working Group